Informative material and brochures
Select the appropriate section from the collapsible menu.
New product brochures
New additions to the PFERD product range
This brochure contains all new PFERD products and additions to the product range.
Files (Catalogue 1)
CHAIN SHARP CS-X chain saw sharpeners
The new generation of the CHAIN SHARP chain saw sharpeners impresses with an improved file position, optimized shape and easier operation.
Milling tools (Catalogue 2)
TC copy burrs for tool and mould construction
TC copy burrs by PFERD are the perfect tools for levelling elevations, such as weld seams. Thanks to the uncut area, the weld seam can be adjusted to the level of the surrounding surface without this being damaged. Copy milling burrs are used in particular in the repair of cutting and punching blades in tool and mould construction.
Drilling and countersink tools
The universal product range for industry and professional trade.
Drilling and countersink tools from a single source. Drills and countersinks for nearly all materials and applications. Highest degree of quality for precise and neat results.
Tungsten carbide burrs for high-performance applications
Optimum stock removal rate and high aggressiveness and good guidance. Significant time savings and a high economic value in comparison to conventional cross-cut burrs. PFERD offers tungsten carbide burrs also with high-quality HICOAT coating.
Tungsten carbide burrs with ALU and NON-FERROUS cuts
Maximum stock removal on aluminium and non-ferrous metals
When it comes to machining aluminium and non-ferrous metals, PFERD offers two high-performance cuts and a HICOAT coating which have been designed specifically for demanding machining tasks on long-chipping and lubricating materials.
Tungsten carbide burrs with CAST cut
Maximum stock removal on cast iron
With the CAST cut, PFERD has developed innovative burrs especially for work on cast iron.
Tungsten carbide burrs with INOX cut
Maximum stock removal on stainless steel (INOX)
With the INOX cut, PFERD has developed innovative burrs for work on stainless steel (INOX).
Tungsten carbide burrs with MICRO cut
The stock removal experts for finishing work
Tungsten carbide burrs with the MICRO cut are specifically designed for finishing and are used in areas in which mounted grinding points are usually used.
TC burrs PLAST, FVK and FVKS cut
Maximum stock removal on plastics
Tungsten carbide burrs with the PLAST, FVK and FVKS cuts are suitable for trimming and contour milling on a wide range of fibre-reinforced plastics (GRP/CRP).
Tungsten carbide burrs with STEEL cut
Maximum stock removal on steel and cast steel
With the innovative STEEL cut, PFERD has developed unique burrs for working with steel and cast steel.
Tungsten carbide burrs with TOUGH and TOUGH-S cuts
The stock removal experts for tough applications
The TOUGH and TOUGH-S cuts have been specially designed for tough operating conditions in dockyards, foundries and steel construction. They are also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence.
Tungsten carbide burrs with TITANIUM cut
Maximum stock removal on titanium
The TITANIUM cut has been especially developed for work on hard titanium materials (tensile strength over 500 N/mm²).
Tungsten carbide burrs with ALLROUND cut
One cut, all materials
With the innovative ALLROUND cut, PFERD has developed unique burrs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its stock removal rate is up to 30 % higher for steel.
The EDGE FINISH system for work on edges
Defined edges in a one-step operation
Alongside a drive which has been especially designed for work on edges, the EDGE FINISH system comprises cutting tools for defined chamfering and rounding/breaking of edges on medium to large workpieces.
ALUMASTER High Speed Disc
Certainly more stock removal
The innovative ALUMASTER High Speed Disc is a unique tool with an extremely high stock removal rate. It is ideal for processing aluminium as it does not generate hazardous or explosive dust. It consists of specially developed tungsten carbide cutting inserts, which are fixed to the High Speed Disc.
Fine grinding and polishing tools (Catalogue 4)
Non-woven tools PNER and PNK
Broad product range for surface finishing. Four special types for applications from coarse to fine. Optimum surface finish due to perfect product design.
PFERD COMBIDISC grinding tools – The product line for many applications
The COMBIDISC product range contains a wide selection of grinding tools for surface finishing. From coarse machining and surface texturing to face-down mirror polishing – the range provides the best tool, even for complicated applications.
POLICAP abrasive caps and cones
The broad, material-specific range of POLICAP abrasive cap and spiral band products offers tool solutions with the highest possible stock removal rate for universal and specific grinding applications alike.
COMBICLICK – Perfect results thanks to a well-designed system
The patented quick-mounting and cooling system from PFERD is suitable for use with fibre, non-woven and felt discs. The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system at the back of the tool.
Cut-off wheels, flap discs and grinding wheels (Catalogue 6)
POLIFAN flap discs
For optimum work results on stainless steel (INOX) and aluminium
POLIFAN flap discs with active grinding coating. Less heat build-up in the workpiece compared with other flap discs. Particularly cool grinding on materials with poor thermal conduction.
The CC-GRIND system
Ultimate stock removal rates. 50% less noise and vibration compared with a grinding wheel. As sturdy and safe as a grinding wheel.
Thin cut-off wheels from PFERD
The perfect tool for any application
The perfect cut-off wheel product range for professional users. Fast, thin cuts with minimized burr formation. Maximum tool life, maximum efficiency, unparalleled cutting comfort.
Grinding wheel CERAMIC SG COMFORT
The CERAMIC SG COMFORT is a hybrid grinding wheel for steel. It combines a layer of coated abrasives and a classic grinding wheel.
PFERD cut-off wheels - Forever better
Performance upgrade 2018: Product range improvements and additions. The right choice for everyone. Optimized design for a simplified product identification.
Cut-off wheels for stationary applications (Catalogue 7)
Stationary cut-off wheels up to 2,000 mm
Reduced cutting costs due to the highest cutting performance. The best cutting qualities. Custom solutions of proven PFERD quality.
Tool drives (Catalogue 9)
Micro motor system
Versatile, efficient and highly cost-effective. Stepless rotational speed from 80000–1000 RPM. Powerful stroke. Fast tool change.
Info, theme brochures, practical knowledge and much more.
Safety and occupational health
Health and safety in the workplace
We see it as our duty to provide comprehensive information about the latest knowledge and options for ensuring the health and safety of PFERD tool users.
FEPA safety recommendations – Abrasive belts
Here you can find safety recommendations for the correct use of abrasive belts.
FEPA safety recommendations – Diamond saws
Here you can find safety recommendations for the correct use of diamond saws for angle grinders.
FEPA safety recommendations – hand-held cutting-off machines
Safety recommendations for diamond saws used on hand-held cutting-off machines
FEPA safety recommendations – Cut-off and reinforced grinding wheels
Here you can find safety recommendations for the correct use of cut-off and reinforced grinding wheels for angle grinders.
FEPA safety recommendations – Grinding tools
This leaflet contains the most important safety recommendations for the correct use of grinding tools.
FEPA safety recommendations – fibre discs
Safety recommendations for the use of fibre discs for grinding with angle grinders
FEPA safety recommendations – flap discs
Safety recommendations for the use of flap discs for grinding with angle grinders