RPM, tool diameter and cutting speed
The speed n is stated in revolutions per minute [RPM]. The required speed is determined from the cutting speed V in [m/min] or [m/s] and the diameter of the tool d x π (3.14).
Cutting speed V
The cutting speed is the speed with which a tool bit is fed through the production material in the direction of the cut to produce chips. The cutting speed V is stated in metres per minute [m/min] or in metres per second [m/s]. It is stated, depending on the speed of the drive n, in revolutions per minute [RPM] and the diameter of the tool d in [mm] x π (3.14).
Trade fairsAs in previous years, PFERD will be exhibiting its products on numerous trade shows.
Calculate the optimum speed for your PFERD Tool
32 Derrick Road, Spartan
PO Box 588, Kempton Park, 1620
Tel: +27 11 2304000
Fax: +27 11 3941232
E-Mail: info @ pferd.co.za