Flexible shaft drives Flexible shaft 4ZG, 6ZG and handpieces Flexible shaft 4 ZG, 6 ZGReplacement casing
|Drive-side coupling DIN||10|
|Drive-side coupling dia. [mm]||30|
|Handpiece side coupling G||16|
|Handpiece side coupling dia. [mm]||16|
Flexible shafts and handpieces/attachments must always be selected according to the required rotational speed and power output. Maximum cost-effectiveness is achieved through the combination of a high-performance tool and an optimal drive.
|profi class 5.0||EAC979c001|
Recommendations for use
- The rotational speed and power output should not fall below or exceed the specified ranges.
- Flexible shaft 4 ZG – With low power output requirements, less than 300 watts, it is possible to fall below the rotational speed range. The radius of curvature should not be smaller than 100 mm.
- Flexible shaft 6 ZG – With low power output requirements, less than 660 watts, it is possible to fall below the rotational speed range. The radius of curvature should not be smaller than 140 mm.